通达信“金钻龙头”主图指标选股公式--破位封板
一、指标说明：这个主图指标是盯龙头、辨趋势。核心看三条线和一堆 “颜色密码”：黄色虚线 “牛熊线” 是大方向锚点，股价在线上说明整体强势，线下就得谨慎；绿色和红色的 “趋势突破线” 更关键 —— 红线跑在上面，短期势头猛，绿线压着红线，就得歇一歇。红色 K 线是 MACD 多头信号，趋势稳；黄色 K 线是 RSI 金叉，刚启动的样子；粉紫色 K 线是 RSI 超买，别盲目追；青色 K 线是普通状态，观望为主。 “龙头启动” 信号，说明 CCI 创新高、股价突破关键位还封板，妥妥的强势龙头，这时候跟上大概率吃肉。
二、主图公式如下：
XA1:=IF(DATE< 2442.46*500,1,1);
牛熊线:DMA(MA(C+REF(C,5)*XA1/C*0.098,90),VOL),DOTLINE,COLORYELLOW;
五日线:MA(C,5) DOTLINE COLORGREEN;CTA1:=C;
趋势突破1:FORCAST(EMA( CTA1,9),7),COLORGREEN;
趋势突破2:FORCAST(EMA( CTA1,17),7),DOTLINE,COLORMAGENTA;
趋势突破3:FORCAST(EMA( CTA1,25),7),COLORGREEN,LINETHICK2;
趋势突破4:IF(趋势突破1>=趋势突破2,趋势突破1,DRAWNULL),COLORRED;
趋势突破5:IF(趋势突破1< 趋势突破2,趋势突破2,DRAWNULL),DOTLINE,COLORGREEN;
趋势突破6:IF(趋势突破2>=趋势突破3,趋势突破3,DRAWNULL),COLORRED,LINETHICK2;
CTA2:=EMA(C,12)-EMA(C,26);
CTA3:=EMA( CTA2,9);
STICKLINE( CTA2>= CTA3,C,OPEN,3,0),COLORRED;
STICKLINE( CTA2>= CTA3,HIGH,LOW,0.00009,0),COLORRED;
CTA4:= CTA2>= CTA3;
CTA5:=(C-LLV(LOW,6))/(HHV(HIGH,6)-LLV(LOW,6))*100;
CTA6:=SMA( CTA5,3,1);
CTA7:=SMA( CTA6,3,1);
STICKLINE(CROSS( CTA6, CTA7) AND CTA7<=55,C,OPEN,3.1,0),COLORYELLOW;
STICKLINE(CROSS( CTA6, CTA7) AND CTA7<=55,HIGH,LOW,0.00009,0),COLORYELLOW;
CTA8:=CROSS( CTA6, CTA7) AND CTA7<=55;
CTA9:=REF(C,1);
CTA10:=SMA(MAX(C- CTA9,0),9,1)/SMA(ABS(C- CTA9),9,1)*100;
STICKLINE( CTA10>=75,OPEN,C,3.1,0),COLORFF00FF;
STICKLINE( CTA10>=75,HIGH,LOW,0.00009,0),COLORFF00FF;
CTA11:= CTA10>=75;STICKLINE(NOT( CTA8) AND NOT( CTA4) AND NOT( CTA11),OPEN,C,3.1,0),COLORCYAN;
STICKLINE(NOT( CTA8) AND NOT( CTA4) AND NOT( CTA11),HIGH,LOW,0.00009,0),COLORCYAN;
CCI:=EMA(((IF((H>C AND C>O) OR (H>O AND O>=C),C,H)+IF((L< C AND C< O) OR(L< O AND O<=C),C,LOW)/3)-MA((IF((H>C AND C>O) OR (H>O AND O>=C),C,H)+IF((L< C AND C< O) OR(L< O AND O<=C),C,LOW)/3),84.0270012))/(0.015*AVEDEV((IF((H>C AND C>O) OR (H>O AND O>=C),C,H)+IF((L< C AND C< O) OR(L< O AND O<=C),C,LOW)/3),84.0270012)),2.0332),COLORWHITE;
龙头启动:=CCI>HHV(MA(CCI,5),21) AND CROSS(C,1.13*(EMA((EXPMA(C*VOL,3)/EXPMA(VOL,3)+EXPMA(C*VOL,6)/EXPMA(VOL,6)+EXPMA(C*VOL,12)/EXPMA(VOL,12)+EXPMA(C*VOL,24)/EXPMA(VOL,24))/4,13))) AND REF(C,1)*1.1-C< 0.01 AND H=C;
趋势王:=龙头启动;
DRAWICON(CROSS(趋势王>0,0.4),L*1,9);
页:
[1]